How to Approve a Molded LED Diffuser Sample
Approve an LED diffuser using a fixed light board, a defined viewing setup and a separate check of the mating rim. Keep the sample and drawing revisions together.
Read the procurement guide →Send the current drawing revision and the parts it must fit. For a lamp shell or diffuser, include a lit sample photo or a sketch that shows where you want the light to spread.

Approve an LED diffuser using a fixed light board, a defined viewing setup and a separate check of the mating rim. Keep the sample and drawing revisions together.
Read the procurement guide →Find the model closest to your part and use its checklist to scope the RFQ. If you are still choosing a form, use the category page to compare the interfaces and sampling needs.

Review an opal annular LED diffuser around a ring board, open center and seating rim. Define inner and outer diameters, clocking and lit appearance.

Specify a compact molded cradle with side guides, wall fixing points and a lower stop. Review it with the intended solar or small wall light.
These review points are for new projects.
Current shell CAD and mating base revision
View review checklist →Diffuser CAD, optical face and rim drawing
View review checklist →Integrated or split-panel layout and shell drawing revision
View review checklist →Battery-door CAD and mating opening details
View review checklist →Bracket and lamp CAD, including both mating faces
View review checklist →Base or carrier model, PCB model and shell revision
View review checklist →